Rosemount 848T Especificações descarregar pdf (Página 37)

Reference Manual

00809-0100-4697, Rev GA

Section 3: Configuration

November 2014

Configuration

82 FAILED_ENABLE Enabled FAILED_ALM alarm conditions. Corresponds bit for bit to the

FAILED_ACTIVE. A bit on means that the corresponding alarm condition is enabled

and will be detected. A bit off means the corresponding alarm condition is disabled

and will not be detected. This parameter is the Read Only copy of FD_FAIL_MAP.

83 FAILED_MASK Mask of Failure Alarm. Corresponds bit for bit to the FAILED_ACTIVE. A bit on

means that the failure is masked out from alarming. This parameter is the Read

Only copy of FD_FAIL_MASK.

84 FAILED_ACTIVE Enumerated list of failure conditions within a device. All open bits are free to be

used as appropriate for each specific device.This parameter is the Read Only copy

of FD_FAIL_ACTIVE.

85 MAINT_PRI Designates the alarming priority of the MAINT_ALM

86 MAINT_ENABLE Enabled MAINT_ALM alarm conditions. Corresponds bit for bit to the

MAINT_ACTIVE. A bit on means that the corresponding alarm condition is enabled

and will be detected. A bit off means the corresponding alarm condition is disabled

and will not be detected.This parameter is the Read Only copy of

FD_OFFSPEC_MAP.

87 MAINT_MASK Mask of Maintenance Alarm. Corresponds bit for bit to the MAINT_ACTIVE. A bit on

means that the failure is masked out from alarming.This parameter is the Read

Only copy of FD_OFFSPEC_MASK.

88 MAINT_ACTIVE Enumerated list of maintenance conditions within a device. All open bits are free to

be used as appropriate for each specific device. This parameter is the Read Only

copy of FD_OFFSPEC_ACTIVE.

89 ADVISE_PRI Designates the alarming priority of the ADVISE_ALM

90 ADVISE_ENABLE Enabled ADVISE_ALM alarm conditions. Corresponds bit for bit to the

ADVISE_ACTIVE. A bit on means that the corresponding alarm condition is enabled

and will be detected. A bit off means the corresponding alarm condition is disabled

and will not be detected.This parameter is the Read Only copy of FD_MAINT_MAP

& FD_CHECK_MAP.

91 ADVISE_MASK Mask of Advisory Alarm. Corresponds bit for bit to the ADVISE_ACTIVE. A bit on

means that the failure is masked out from alarming.This parameter is the Read

Only copy of FD_MAINT_MASK & FD_CHECK_MASK.

92 ADVISE_ACTIVE Enumerated list of advisory conditions within a device. All open bits are free to be

used as appropriate for each specific device. This parameter is the Read Only copy

of FD_MAINT_ACTIVE & FD_CHECK_ACTIVE.

Table 3-2. Resource Block Parameters

Number Parameter Description

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 135 136

Sem comentários

Rosemount 848T Especificações Página 37